Dubro

Using a highly controlled process, Du-Bro has devised a way to stabilize the Push Rod material so that neither heat nor cold has much effect on tri...

Specially formulated replacement stopper to convert any 2 oz to 50 oz Du-Bro fuel tank to Gasoline or Glo-Fuel. The Gasoline stopper is brown and t...

Standard Hinge measurements: 5/8" (16 mm) Wide X 1 1/8" (28 mm) Long. Weight: 0.5 grams / hinge.Mini Hinge measurements: 7/16" (11 mm) wide X 1 1/8...

These T-Pins are a must for all model building. Holds parts in place while gluing, sheeting, laminating, assembly, etc. An all around building aid....

Our Electric Flyer Hinge Tape has great adhesion characteristics and is easy to remove. In addition, our hinge tape will not leave residue. 15' Rol...

Built to take heavy loads, 3/4" (19 mm) Wide X 1-3/8" (35 mm) Long X .040" (1 mm) thick. Removable 3/64" (1.2 mm) diameter cotter pin for maximum c...

#216 - Centers & guides for perfectly aligned slots for any hinge. (3) blades fit #2 X-Acto handle. (3) snap-on jig guides and (1) balsa picker...

Comes with washer permanently attached to screw so you can't lose it. Screw size: #2 X 7/16". (24/pkg)Weight: 0.46 grams/each

Standard Hinge measurements: 5/8" (16 mm) Wide X 1 1/8" (28 mm) Long. Weight: 0.5 grams / hinge.Mini Hinge measurements: 7/16" (11 mm) wide X 1 1/8...

Exhaust Deflectors help to keep models clean and free of exhaust oils. 1/pkg

Smooth inflatable tires with positive seal air valves. Features two piece bolt together hubs and hub caps. Wheels can be inflated (or deflated) thr...

350T takes a 5/32 Axle (4mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the marke...

For Gasoline or Diesel Fuel ONLY. This tubing won't harden or crack and remains flexible.This tubing is also a great replacement for fuel line on s...

For Gasoline or Diesel Fuel ONLY. This tubing won't harden or crack and remains flexible.This tubing is also a great replacement for fuel line on s...

Two essential tools for the shop are the Body Reamer & Scissors. Whether you are reaming holes for your body posts, antenna, or cutting a custo...

These T-Pins are a must for all model building. Holds parts in place while gluing, sheeting, laminating, assembly, etc. An all around building aid....

Using a highly controlled process, Du-Bro has devised a way to stabilize the Push Rod material so that neither heat nor cold has much effect on tri...

Using a highly controlled process, Du-Bro has devised a way to stabilize the Push Rod material so that neither heat nor cold has much effect on tri...

The outside hex head will fit your glo-plug / prop nut wrench, inside socket is made to fit standard allen wrenches. Both methods insure a safe, no...

Can be used in conjunction with our nylon or steel Kwik-Links or with ball links where extra long pushrods are needed. Bendable and strong. Rods ar...

1 3/8" Long with 5 adjustment positions. Each set includes 2 control horns that are centered on base, (2) self threading nut plates and (4) 2-56 x ...

Standard and Metric taps and drills sold in matched pairs or in complete sets to eliminate the confusion of which drill and tap to use together. T...

Designed for use with 1/8" or 5/32" brass annealed fuel tubing or aluminum tubing. These tools are perfect for most configurations and they do not ...

Nitro Line comes in 6 hot colors to add a great look to your vehicle. Our tubing is made from high quality 3/32" (2.38 mm) ID silicone that is dura...

Can be used in conjunction with our nylon or steel Kwik-Links or with ball links where extra long pushrods are needed. Bendable and strong. Rods ar...

Du-Bro's permanent mount blind nuts are available in 6 sizes. Used for mounting engines, landing gear, cowls, hatches, etc. The perfect mounting nu...

Includes 1.5' (457.2 mm) blue (medium 3/32" / 2.38 mm) and 1.5' (457.2 mm) red(medium 3/32" / 2.38 mm) silicone tubing to distinguish your carb lin...

5 piece ball link set, excellent for off-set steering, throttle and servo hook-ups. Ball is threaded for 2-56 nut. Threaded coupler 3/4" with 3/8" ...

Fill your tank with ease directly from your 1 gallon fuel container. Just drill or cut a 1/2" (12.7 mm) diameter hole in the cap and install the fi...

For .35-.60 size airplanes. Our super quality landing gear will absorb landings without bending out of shape. Featuring a one piece design, this Hi...

300T takes a 5/32 Axle (4mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the marke...

High quality machined brass shaft collars that are great for wire landing gear and axle shafts. Enough stock so that threads will not strip and can...

Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used ...

Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used ...

E/Z Connectors (#121 & 605) come complete with 2 or 12 each Connector, 4-40 x 1/8 Slotted Screw, black snap washer, and push on steel washer. W...

Du-Bro's Tru-Spin Prop Balancer is the most precise balancer on the market. Our specially designed locking cone securely centers and locks props on...

These are 1/2A T-Style Control Horns.FEATURES: Nylon constructionINCLUDES: Two control horns w/4 adjusting holes and 2 mounting holes (3/4" long {t...

Smooth inflatable tires with positive seal air valves. Features two piece bolt together hubs and hub caps. Wheels can be inflated (or deflated) thr...

Standard Hinge measurements: 5/8" (16 mm) Wide X 1 1/8" (28 mm) Long. Weight: 0.5 grams / hinge.Mini Hinge measurements: 7/16" (11 mm) wide X 1 1/8...

The outside hex head will fit your glo-plug / prop nut wrench, inside socket is made to fit standard allen wrenches. Both methods insure a safe, no...

These T-Pins are a must for all model building. Holds parts in place while gluing, sheeting, laminating, assembly, etc. An all around building aid....

Nitro Line comes in 6 hot colors to add a great look to your vehicle. Our tubing is made from high quality 3/32" (2.38 mm) ID silicone that is dura...

Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used ...

Nitro Line comes in 6 hot colors to add a great look to your vehicle. Our tubing is made from high quality 3/32" (2.38 mm) ID silicone that is dura...

The DU-BRO Fuel Line Plugs work with gasoline and glo fuel. They can be used to temporarily shut off fuel and air lines. Small plug is for 1/16" (1...

#213 - Custom make your own muffler extension. Will fit most engines .29-.80 2 cycle and most mufflers. This aluminum stock can be cut, drilled, ta...

For Glo-Fuel ONLY. Won't crack or harden and fits securely on fuel fitting.Made in USATUBING SIZESmall ID:1/16" (1.5 mm) OD: 9/64" (3.57 mm)Medium ...

Snap fit on to wire, simply bend 90 degree angle on pushrod and install the E/Z Link on to pushrod (no Z Bend required). Super lightweight design. ...